Glass Top and Electronic Control Chest Freezer 373 L, from -18 °C to -22 °C

Glass Top and Electronic Control Chest Freezer 373 L, from -18 °C to -22 °C

Shop freezer Glazed with convex glass often referred to as a freezing site, it is designed for storing and exposure placed in frozen food baskets and ice cream. The housing is made of Laminated PVC sheet, resistant to scratches and corrosion. Polyurethane insulation, low-emission windshield and torsional rolls were used.

Modifications and accessories

• Electronic thermometer with liquid crystal display is fixed permanently on the hardware. Powered from a microbaterery about durability about 2 years. Pointing an approximate ± 2OC stabilized air temperature at the load level.
• Electronic controller Embedded for fixed to hardware replaces the thermostat and allows you to set the desired temperature to the range permissible for a given type of equipment, and indicates the constantly stabilized air temperature with accuracy 2OC. In addition, it protects the compressor against overloads.
• Mechanical lock with removable key mounted on the glass or in the freezer holder.
• Interior lighting placed in the freezer chamber can be fixed permanently on the back or front wall. It consists of a special power supply and a waterproof belt with white or colored diodes, placed in a special profile. There is a lighting switch on the front wall of the freezer. In box freezers with a lighting cover in the form of a stylized LED bulb, located on the side of the inside of the flap and the inertial switch is switched on when opening the flap.
• to the above-mentioned slot can be mounted in the upper part in a special lighting profile type: Furniture fluorescent lamp LED strap
• The internal fan is used in refrigeration equipment to prevent freezing products at the bottom of the chamber.
• water drain from defrosting the freezer can be made to order. It is recommended in freezers operating in rooms with high humidity and opening frequencies.
• polluted water drain is used in cooling equipment when storing in a cooling chamber products from which they leak contaminated liquids. The drainage of contaminated water can be made for sewage systems or special containers.
• Already with small series we make advertising prints on the UV printing technology.
• Adjusting hardware to work in the range from -35oc ÷ + 10OC.
• brake wheels or reinforced
• strip on price lists attached to the back of the freezer
• additional compartments of small and large baskets. Freezer compartments
• baskets for the entire chamber (deep). They protect against the grinding of products to the walls
• protective strips protecting equipment against shopping carts
• additional ventilation of the compressor chamber is needed to cover ventilation grars
• adaptation to Kuwet:
  • with a glass note and a basket for the GN cuvette
  • with holes in a round cuvette cover
• adjusting the height of the equipment to assumptions Employer.
• Equipment made of stainless or acid-resistant sheets
• to work in other ambient conditions. Adjusting hardware to work in low or high ambient temperature and elevated relative humidity.
• increasing freezing capacity. With this option, a refrigeration system is reinforced and a special controller with a temperature display and a function   fast freezing
• adaptation for mobile applications
• power from mobile energy sources
• Sites are available with outskirts in white, red, blue or gray. Please select colors when placing the order.

Freezer has a manual defrosting system